Wide width polyethylene acrylic (polyester) waterproofing membrane with self-adhesive layer
Polymer composite waterproofing membrane is a new type of waterproofing membrane that is mainly composed of polyethylene synthetic polymer material as the waterproof layer, added with additives, anti-aging layer, enhanced thickening layer, and polypropylene non-woven fabric through automated production line. The surface is added with modified asphalt self-adhesive polymer.
Polyvinyl chloride (PVC) root puncture resistant waterproofing membrane
Due to the inability of traditional waterproofing membranes, ordinary polymer waterproofing materials, and various waterproof coatings to meet the requirements of building planting systems, these materials lack root resistance and are easily penetrated by plant root tips, causing damage and leakage to the building, directly leading to the failure of the "building planting and greening" system.
Modified Bituminous Root-resistance Waterproofing Felt
The SBS modified bituminous planting roof root-resistance waterproofing felt is a modified bituminous felt, made of a long-fiber polyester felt or a copper foil sheet as reinforcements, added with an imported chemical resistance root agent as a coating cover material, and coated with polyethylene film, fine sand or mineral particle material as an isolation material.
Reactive adhesive polymer wet laid waterproofing membrane (strong cross membrane)
Strong cross membrane butyl rubber waterproofing membrane is a new type of waterproofing membrane made of strong cross membrane as the surface substrate, with one side coated with butyl self-adhesive, and the isolation layer made of anti-aging polyethylene silicone oil film. The product meets the requirements of wet laid Class P Type II waterproofing membrane in GB/T23457-2009 laid/Wet laid Waterproofing Membrane
Chlorinated polyethylene (CPE) waterproofing membrane
CPE is a new type of high-end waterproof material. The main material of this product is made of special polymer synthetic material chlorinated polyethylene (CPE), added with appropriate amounts of chemical additives and fillers, and processed through processes such as plasticizing, mixing, and rolling with polyester non-woven fabric to form a polymer waterproofing membrane.
High density polyethylene HDPE/EVA waterproof board
High density polyethylene (HDPE)/EVA waterproof board is a type of anti-seepage material made from polymer materials, which can prevent liquid leakage and gas evaporation. Widely used in construction, transportation, subways, tunnels, and engineering projects.
Polymer Waterproof Material Series-Drainage Board
The drainage board is made of high-density polyethylene (HDPE) plastic board extruded into a conical protrusion (or hollow cylindrical porous), and the top surface of the conical protrusion is bonded with a layer of filtering geotextile to prevent soil particles from passing through, thereby avoiding blockage of the drainage channel and ensuring smooth drainage of the channel.
Pre laid/Wet laid waterproofing membrane
Wide self-adhesive pre laid polyester tire waterproofing membrane (hereinafter referred to as pre laid PY type) is a self-adhesive waterproofing membrane made of asphalt based polyester tire waterproofing membrane as the main material (with functional additives added), coated with self-adhesive layers on both sides, and attached with a peelable silicon coating film as the isolation material.
Polyethylene propylene (polyester) polymer waterproofing membrane
High molecular polyethylene polypropylene (polyester) fiber waterproof coiled material is made of polyethylene, high-strength polypropylene (polyester) fiber non-woven fabric, ultraviolet light barrier, anti-aging agent and other high molecular materials by one-time extrusion processing of automatic production line. The middle layer of coiled material is a waterproof layer and anti-aging layer, and the upper and lower sides are reinforced bonding layers. It is firm, reliable, free of warping edges, hollowing, and double-layer waterproof. It is a new type of waterproof material.
Single component/two-component polyurethane waterproof coating
The two-component polyurethane waterproof coating is composed of component A mainly containing isocyanate groups (- NCO) and component B with non tar groups as fillers. When the two components A and B are mixed, they react to form a odorless network cross-linked polymer elastic material.
Environment-friendly Polyurethane Waterproof Paint
The environment-friendly polyurethane waterproof paint is a single-component polyurethane waterproof paint, which is prepared by using isocyanate and polyether polyol as main raw materials and adding various auxiliary agents and fillers to obtain the waterproof paint.
Copyright @ 2024 Xinbao Waterproof Material Co., LTD